bundles bundles bundles bundles bundles CSL ELITE PEDALS LC Series CSL

DESCRIPTION

CSL_EP_LC_teaser_1280x1280

로드셀 브레이크를 포함한  CSL 엘리트 페달

CSL 엘리트 페달 LC는 3번째 페달인 로드셀 브레이크 유닛과 함께
완벽한 세트로 준비되었습니다.
CSLEP_detail-1_1280x1280

Full Functionality

포함된 CSL 엘리트 페달 로드셀 키트는 로드셀 브레이크 유닛이
추가되었습니다.
이전의 브레이크 유닛은 새로운 리미터 패드와 함께 클러치 페달로서의
역할을 수행합니다.
PCBA 교체 유닛은 USB연결과 핸드 브레이크 포트를 추가합니다.

Adjustable 90KG Loadcell

로드셀은 페달 암에 직접 통합되어
페달 암 자체에 가해지는 압력을 측정합니다. 현실적이고 강한 압력을 가할 수 있을 뿐만 아니라,
실제 차량과 같이 근육의 텐션으로
브레이크를 정밀하게 조절할 수 있습니다.
CSLEP_detail-2_1280x1280

Premium Materials

합리적인 가격임에도 불구하고
하이엔드 페달들과 동일한 기술과 소재를 만나보실 수 있습니다.
CSL-EPLC-580x366_03_1280x1280

Solid, Full-Metal Design

고품질의 풀 메탈 알루미늄 디자인은 오랜 내구성을 보장하고,
페달의 놀라운 안정성 또한 제공합니다.

16-Bit Resolution

메탈 기어로 제작된 두 페달암은
새로운 potentiometer를 장착하여
12비트 해상도를 제공하며,
로드셀 브레이크는
초고속 16비트 해상도를 제공합니다.
CSL-EPLC_1280x1280

Fully Adjustable

이 세트에는 세 개의 미끄럼 방지 패드가 포함되어 있어
각 페달에 고무 패드, 일반 패드 또는 미끄럼 방지 패드 중 하나를 장착할 수 있습니다.
CSLEP_detail-10_1280x1280

Free Layout

힐 레스트 위의 각각의 페달들은 (엑셀, 브레이크, 옵션 클러치) 개별적으로 수평 위치를 조절할 수 있을 뿐만 아니라, 힐 레스트 플레이트 없이도 커스터마이징 된 시트에 개별 장착이 가능합니다.

Adjustable Brake Stiffness

완전히 새롭게 설계된 브레이크는
별도의 공구를 사용하지 않고
저항과 이동성을 조절할 수 있습니다. Elastomer 스프링을 변경하고
배열하기만 하면
다양한 저항 옵션을 만들 수 있습니다.
CSLEP_detail-3_1280x1280

링크 더보기

특징

  • Pedal units and heel rest made from Aluminum
  • Extra long pedals for more realism and comfort
  • Heel rest offers large rest surface
  • Adjustable horizontal distance between pedal units, allows asynchronous setup
  • Ability to easily remove pedals from heelrest and install them together with the electronics in cockpits or stands seperately
  • 12bit resolution potentiometers on throttle and clutch pedal units
  • 16bit resolution loadcell brake pedal unit
  • High durable loadcell integration with pedal pressure up to 90 kg​
  • The whole brake pedal arm is a load cell sensor
  • Adjustable brake force by PC driver software or Wheel Base tuning menu​
  • Adjustable brake resistance and travel by exchangable Elastomer springs. No tools needed
  • Detachable rubber pedal covers offer good grip and softer pedal surface
  • Applicable anti-skid-pads for the pedal surface offer a perfect grip for racing shoes
  • USB connection to PC
  • Direct connection to Fanatec Wheel Bases and Wheels
  • Dedicated port for ClubSport Handbrake

호환성

Platforms

  • > PC:
    • > If you connect it to a Fanatec Wheel Base / Racing Wheel it will be compatible to all racing games. For that case, please check the compatibility details on the product page of the connected product.
    • > It will work with any racing wheel, also of​ any other brand (Logitech, Thrustmaster, etc), if the pedals are connected to PC via USB and if the game supports a second controller. ​E.g. these PC games support a second USB controller:
      • > iRacing
      • > Assetto Corsa
      • > Project Cars
      • > GTR 2
      • > Race 07
      • > rFactor
      • >Live for Speed
      • >...and many others
  • > Consoles: This pedal set can be used on gaming consoles, if connected through a Fanatec Wheel Base / Racing Wheel. Please check the information on the product page of the Fanatec product through which they will be connected to the console. It will not work on consoles using the direct USB Connection or a ClubSport USB Adapter.

Peripherals

  • > Compatible to any Fanatec Wheel Base or Fanatec Racing Wheel with RJ12 Pedals connector. To connect Fanatec Wheels with PS/2 Pedal Socket, you need the additional PS/2 to RJ12 cable.
  • > With installed Loadcell Kit, the pedals are not compatible to the ClubSport USB Adapter. Please use the included USB connector (PC only)..

참고 사항

  • > The CSL Elite Pedals LC come as a set of the CSL Elite Pedals with the CSL Elite Pedals Loadcell Kit, delivered as seperate products for assembly.
  • > Slight colour variations may occur between CSL Elite Pedals and CSL Elite Pedals Loadcell Kit
  • > That makes the former brake to clutch and introduces a new, more reallistic loadcell brake pedal into the CSL Elite Pedals.​
  • > Max resolution depending on the connection:
    • > through CSW B V1 / CSW B V2 / CS WB V2.5 / CSL E WB / CSL E RW PS4: 12 bit (4096 values) on all axes
    • > USB direct connection (PC): brake 16 bit (65536 values) / clutch and throttle: 12 bit (4096 values)

포함 사항

  • Throttle pedal unit
  • Clutch pedal unit
  • Loadcell brake unit
  • Heel rest
  • Loadcell Kit electronics
  • 1x clutch limiter pad
  • 3x rubber pedal cover (detachable)
  • 3x pedal plate anti-skid pad (self adhesive)
  • Elastomer springs for loadcell brake unit with various shore hardness
  • 2x pedal unit stabilizer bars
  • 1x Wheel Base connection cable RJ12/RJ12 (~3m)
  • 1x USB cable (~3m)
  • 1x Wrench 13 mm (cropped)
  • 1x Allen Key 6 mm
  • 1x Allen Key 2 mm
  • Quick Guides
  • Mounting screws

상세 스펙

지원 기기 PC, PS4 Ready, XBox One Ready
패달 패드 Aluminium, Anti-skid, Rubber
컬러 키트 No
최대 지원 해상도 비트 12 (4096) on throttle and clutch, 16 (65536) on brake
USB 연결 Direct
브레이크 강도 조절 및 이동 Yes
스프링 강도 조정 No
센서 Loadcell, Potentiometer
페달 각도 조절 No
수직 조정 No
수평 조정 Yes
댐퍼 No
Throttle vibration No
ABS brake vibration No
Degressive clutch No
클러치 페달 Yes
브레이크 민감도 조정 Yes
로드셀 브레이크 Yes
주요 소재 Diecast Aluminium
하드마운트 Bottom

DOWNLOADS

Downloads for “CSL Elite Wheel Base V1.1”
Downloads for bundle components
Information

Driver (for PC)
The Fanatec wheel driver will also support these pedals. Please check and download the driver for your Fanatec wheel. If you do not have a Fanatec wheel please install the driver listed on the left side.

Please connect the Pedals either to the wheel by RJ12 cable or by USB directly. Do not use both connections at the same time! On consoles you will have to plug the pedals into the wheel.

Brake
The pressure sensitive load cell brake on these pedals works completely different to potentiometer pedals. With the feature “BrF” (Brakeforce) within the wheel tuning menu, you can adjust how much pedal pressure is needed to have full brake power in the software. You get used to the feeling very fast and soon you benefit from the advantages over “normal” brake sensors.
If you think your pedals do not work like expected, please connect them by USB to a PC if possible and check the functions this way. Please also check the cable connections.

Drilling template – additional information:

1. When printing the Drilling Template at home, please make sure that the print size is 100% (file size = print size). Therefore deactivate “automatic page scaling” in the print dialog for example.
2. Before drilling the holes, please check if the hole marks on your printed Drilling Template fit to the screw holes of your pedals.

FAQ

Wheel bases not recognised in Steam games

Follow these steps to potentially solve the problem:

  1. Open the Steam application
  2. Select “View”
  3. Select “Settings”
  4. Select “Controller”
  5. In “General Controller Settings”, uncheck the checkbox for “Generic Gamepad Configuration Support”.

If the issue persists, reinstall the Steam Client.

Which driver version should I choose (32 or 64 bit)?

There is a 32 bit and a 64 bit version of a Fanatec driver available. It depends on the “system type” of your PC which of those versions you need to choose. If the system type of your PC has a 32 bit operation system, you need the 32 bit version of the driver. If the system type of your PC has the 64 bit operation system, you will need the 64 bit version.

For finding this information go to the “Control Panel” of your PC -> “System and Security” -> System:

Security Update for Windows 7 (KB3033929) -> Win7 issue with driver v261

We have received a couple reports that driver v261 cannot be installed on some Win7 PCs. The root cause is that Windows 7 Updates sometimes are not working as expected. Windows 7 is not aware of recent verification signatures. Therefore we needed to export a special driver for Windows 7 which includes our old driver signature as well. Please try this driver if you are experiencing issues like that:

2016.12.05-Fanatec_driver_261_DualSigned:
https://www.fanatec.com/forum/uploads/FileUpload/1d/bfd0b5d389b03d56d485708e3b9e8c.zip

CSW V2 and V2.5 users can also use our latest beta driver (V281) which resolves the issue as well:
https://www.fanatec.com/forum/discussion/547/fanatec-beta-driver-v281-for-csw-v2-and-v2-5/p1

This driver also works well for other Windows versions (Win7, Win8, Win8.1, Win10). Feel free to test this driver if you are having any issues installing the latest official driver v261 and let our support team know. Thank you!

SIMLAR PRODUCTS

CSP_V3i_preview_600x600

BUNDLE

CSL_EP_preview_600x600

BUNDLE

CSP_V3_preview_600x600
Read, write and discuss reviews...
FAQ
>
CSP_V3i_preview_600x600

BUNDLE

CSL_EP_preview_600x600

BUNDLE

CSP_V3_preview_600x600
X Close menu
CSL_EP_LC_teaser_1280x1280

로드셀 브레이크를 포함한 CSL 엘리트 페달

CSL 엘리트 페달 LC는 3번째 페달인 로드셀 브레이크 유닛과 함께
완벽한 세트로 준비되었습니다.
CSLEP_detail-1_1280x1280

Full Functionality

포함된 CSL 엘리트 페달 로드셀 키트는 로드셀 브레이크 유닛이
추가되었습니다.
이전의 브레이크 유닛은 새로운 리미터 패드와 함께 클러치 페달로서의
역할을 수행합니다.
PCBA 교체 유닛은 USB연결과 핸드 브레이크 포트를 추가합니다.
CSLEP_detail-2_1280x1280

Adjustable 90KG Loadcell

로드셀은 페달 암에 직접 통합되어
페달 암 자체에 가해지는 압력을 측정합니다. 현실적이고 강한 압력을 가할 수 있을 뿐만 아니라,
실제 차량과 같이 근육의 텐션으로
브레이크를 정밀하게 조절할 수 있습니다.

Premium Materials

합리적인 가격임에도 불구하고
하이엔드 페달들과 동일한 기술과 소재를 만나보실 수 있습니다.
CSL-EPLC-580x366_03_1280x1280

Solid, Full-Metal Design

고품질의 풀 메탈 알루미늄 디자인은 오랜 내구성을 보장하고,
페달의 놀라운 안정성 또한 제공합니다.
CSL-EPLC_1280x1280

16-Bit Resolution

메탈 기어로 제작된 두 페달암은
새로운 potentiometer를 장착하여
12비트 해상도를 제공하며,
로드셀 브레이크는
초고속 16비트 해상도를 제공합니다.

Fully Adjustable

이 세트에는 세 개의 미끄럼 방지 패드가 포함되어 있어
각 페달에 고무 패드, 일반 패드 또는 미끄럼 방지 패드 중 하나를 장착할 수 있습니다.
CSLEP_detail-10_1280x1280

Free Layout

힐 레스트 위의 각각의 페달들은 (엑셀, 브레이크, 옵션 클러치) 개별적으로 수평 위치를 조절할 수 있을 뿐만 아니라, 힐 레스트 플레이트 없이도 커스터마이징 된 시트에 개별 장착이 가능합니다.
CSLEP_detail-3_1280x1280

Adjustable Brake Stiffness

완전히 새롭게 설계된 브레이크는
별도의 공구를 사용하지 않고
저항과 이동성을 조절할 수 있습니다. Elastomer 스프링을 변경하고
배열하기만 하면
다양한 저항 옵션을 만들 수 있습니다.

링크 더보기

특징

  • Pedal units and heel rest made from Aluminum
  • Extra long pedals for more realism and comfort
  • Heel rest offers large rest surface
  • Adjustable horizontal distance between pedal units, allows asynchronous setup
  • Ability to easily remove pedals from heelrest and install them together with the electronics in cockpits or stands seperately
  • 12bit resolution potentiometers on throttle and clutch pedal units
  • 16bit resolution loadcell brake pedal unit
  • High durable loadcell integration with pedal pressure up to 90 kg​
  • The whole brake pedal arm is a load cell sensor
  • Adjustable brake force by PC driver software or Wheel Base tuning menu​
  • Adjustable brake resistance and travel by exchangable Elastomer springs. No tools needed
  • Detachable rubber pedal covers offer good grip and softer pedal surface
  • Applicable anti-skid-pads for the pedal surface offer a perfect grip for racing shoes
  • USB connection to PC
  • Direct connection to Fanatec Wheel Bases and Wheels
  • Dedicated port for ClubSport Handbrake

호환성

Platforms

  • > PC:
    • > If you connect it to a Fanatec Wheel Base / Racing Wheel it will be compatible to all racing games. For that case, please check the compatibility details on the product page of the connected product.
    • > It will work with any racing wheel, also of​ any other brand (Logitech, Thrustmaster, etc), if the pedals are connected to PC via USB and if the game supports a second controller. ​E.g. these PC games support a second USB controller:
      • > iRacing
      • > Assetto Corsa
      • > Project Cars
      • > GTR 2
      • > Race 07
      • > rFactor
      • >Live for Speed
      • >...and many others
  • > Consoles: This pedal set can be used on gaming consoles, if connected through a Fanatec Wheel Base / Racing Wheel. Please check the information on the product page of the Fanatec product through which they will be connected to the console. It will not work on consoles using the direct USB Connection or a ClubSport USB Adapter.

Peripherals

  • > Compatible to any Fanatec Wheel Base or Fanatec Racing Wheel with RJ12 Pedals connector. To connect Fanatec Wheels with PS/2 Pedal Socket, you need the additional PS/2 to RJ12 cable.
  • > With installed Loadcell Kit, the pedals are not compatible to the ClubSport USB Adapter. Please use the included USB connector (PC only)..

참고 사항

  • > The CSL Elite Pedals LC come as a set of the CSL Elite Pedals with the CSL Elite Pedals Loadcell Kit, delivered as seperate products for assembly.
  • > Slight colour variations may occur between CSL Elite Pedals and CSL Elite Pedals Loadcell Kit
  • > That makes the former brake to clutch and introduces a new, more reallistic loadcell brake pedal into the CSL Elite Pedals.​
  • > Max resolution depending on the connection:
    • > through CSW B V1 / CSW B V2 / CS WB V2.5 / CSL E WB / CSL E RW PS4: 12 bit (4096 values) on all axes
    • > USB direct connection (PC): brake 16 bit (65536 values) / clutch and throttle: 12 bit (4096 values)

포함 사항

  • Throttle pedal unit
  • Clutch pedal unit
  • Loadcell brake unit
  • Heel rest
  • Loadcell Kit electronics
  • 1x clutch limiter pad
  • 3x rubber pedal cover (detachable)
  • 3x pedal plate anti-skid pad (self adhesive)
  • Elastomer springs for loadcell brake unit with various shore hardness
  • 2x pedal unit stabilizer bars
  • 1x Wheel Base connection cable RJ12/RJ12 (~3m)
  • 1x USB cable (~3m)
  • 1x Wrench 13 mm (cropped)
  • 1x Allen Key 6 mm
  • 1x Allen Key 2 mm
  • Quick Guides
  • Mounting screws

상세 스펙

지원 기기 PC, PS4 Ready, XBox One Ready
패달 패드 Aluminium, Anti-skid, Rubber
컬러 키트 No
최대 지원 해상도 비트 12 (4096) on throttle and clutch, 16 (65536) on brake
USB 연결 Direct
브레이크 강도 조절 및 이동 Yes
스프링 강도 조정 No
센서 Loadcell, Potentiometer
페달 각도 조절 No
수직 조정 No
수평 조정 Yes
댐퍼 No
Throttle vibration No
ABS brake vibration No
Degressive clutch No
클러치 페달 Yes
브레이크 민감도 조정 Yes
로드셀 브레이크 Yes
주요 소재 Diecast Aluminium
하드마운트 Bottom
X Close menu
Downloads for “CSL Elite Wheel Base V1.1”
Downloads for bundle components
Information

Driver (for PC)
The Fanatec wheel driver will also support these pedals. Please check and download the driver for your Fanatec wheel. If you do not have a Fanatec wheel please install the driver listed on the left side.

Please connect the Pedals either to the wheel by RJ12 cable or by USB directly. Do not use both connections at the same time! On consoles you will have to plug the pedals into the wheel.

Brake
The pressure sensitive load cell brake on these pedals works completely different to potentiometer pedals. With the feature “BrF” (Brakeforce) within the wheel tuning menu, you can adjust how much pedal pressure is needed to have full brake power in the software. You get used to the feeling very fast and soon you benefit from the advantages over “normal” brake sensors.
If you think your pedals do not work like expected, please connect them by USB to a PC if possible and check the functions this way. Please also check the cable connections.

Drilling template – additional information:

1. When printing the Drilling Template at home, please make sure that the print size is 100% (file size = print size). Therefore deactivate “automatic page scaling” in the print dialog for example.
2. Before drilling the holes, please check if the hole marks on your printed Drilling Template fit to the screw holes of your pedals.

X Close menu

Wheel bases not recognised in Steam games

Follow these steps to potentially solve the problem:

  1. Open the Steam application
  2. Select “View”
  3. Select “Settings”
  4. Select “Controller”
  5. In “General Controller Settings”, uncheck the checkbox for “Generic Gamepad Configuration Support”.

If the issue persists, reinstall the Steam Client.

Which driver version should I choose (32 or 64 bit)?

There is a 32 bit and a 64 bit version of a Fanatec driver available. It depends on the “system type” of your PC which of those versions you need to choose. If the system type of your PC has a 32 bit operation system, you need the 32 bit version of the driver. If the system type of your PC has the 64 bit operation system, you will need the 64 bit version.

For finding this information go to the “Control Panel” of your PC -> “System and Security” -> System:

Security Update for Windows 7 (KB3033929) -> Win7 issue with driver v261

We have received a couple reports that driver v261 cannot be installed on some Win7 PCs. The root cause is that Windows 7 Updates sometimes are not working as expected. Windows 7 is not aware of recent verification signatures. Therefore we needed to export a special driver for Windows 7 which includes our old driver signature as well. Please try this driver if you are experiencing issues like that:

2016.12.05-Fanatec_driver_261_DualSigned:
https://www.fanatec.com/forum/uploads/FileUpload/1d/bfd0b5d389b03d56d485708e3b9e8c.zip

CSW V2 and V2.5 users can also use our latest beta driver (V281) which resolves the issue as well:
https://www.fanatec.com/forum/discussion/547/fanatec-beta-driver-v281-for-csw-v2-and-v2-5/p1

This driver also works well for other Windows versions (Win7, Win8, Win8.1, Win10). Feel free to test this driver if you are having any issues installing the latest official driver v261 and let our support team know. Thank you!